FW.004/TS_01 SS_TOP_001 is a short-sleeve regulation layer developed for daily movement and short-distance running. Constructed entirely from the TS_01 Glacial Mesh platform, the garment prioritizes continuous airflow and unrestricted moisture transfer through a fully perforated body structure.

Designed around the requirements of repeated daily use, SS_TOP_001 minimizes material density while maintaining sufficient coverage for urban and outdoor environments. The result is a lightweight running layer intended to reduce heat accumulation during movement without introducing unnecessary structure or weight.

As a foundational component within the FW.004 Motion System, SS_TOP_001 functions as a primary next-to-skin layer for warm conditions and high-frequency training.

TEXTILE_SYSTEM

Within SS_TOP_001, the TS_01 regulation platform is deployed across the entirety of the garment through a continuous perforation architecture spanning the body and sleeves. This approach transforms the garment into an active ventilation system rather than a conventional running tee.

By distributing airflow across the entire surface area of the garment, heat generated during movement can escape more efficiently while moisture is allowed to evaporate directly through the textile structure. The result is a regulation-first layer designed specifically for daily running conditions where breathability takes precedence over insulation or protection.

The implementation of TS_01 within SS_TOP_001 represents the most direct expression of the Glacial Mesh platform within the FW.004 ecosystem.

SYSTEM_PROPERTIES

+ FULL-SURFACE VENTILATION

Laser-cut perforation extends across all primary garment panels, promoting continuous airflow throughout the torso, shoulders and arms during movement.

+ THERMAL REGULATION

The open structure reduces heat accumulation by enabling warm air to escape through the garment rather than remaining trapped against the body.

+ LOW-MASS CONSTRUCTION

Reduced material density minimizes perceived weight during activity while maintaining the freedom of movement required for repeated daily use.

CONSTRUCTION

SS_TOP_001 utilizes a raglan sleeve configuration designed to eliminate traditional shoulder seam placement and improve mobility throughout the upper body. The sleeve geometry allows movement to occur more naturally during arm swing and sustained running efforts.

Primary body panels are constructed from TS_01 Glacial Mesh and feature laser-cut perforation distributed across the entirety of the garment. This full-panel approach ensures that ventilation remains consistent regardless of body position or movement pattern.

A raw-cut hem construction removes unnecessary finishing components at the garment edge, reducing weight while maintaining a clean and unobtrusive profile. Combined with the lightweight textile architecture, the resulting system remains focused on airflow, comfort and unrestricted movement.

PERFORMANCE

SS_TOP_001 is optimized for warm-weather training, short-distance runs and everyday movement where thermal regulation becomes the primary performance requirement. The fully perforated construction allows the garment to function as a continuous ventilation layer, supporting heat dissipation throughout activity.

During sustained effort, airflow through the garment assists in reducing moisture retention and surface saturation, helping maintain comfort across changing intensity levels. The lightweight structure also minimizes distraction during movement, allowing the garment to remain unobtrusive throughout use.

Within the FW.004 Motion System, SS_TOP_001 serves as the primary regulation layer for users seeking maximum breathability and minimal thermal burden during daily training.

CARE

Machine wash cold.
Wash with similar colors.
Do not bleach.
Do not tumble dry.
Hang dry immediately after washing.
Do not iron directly on perforated areas.
Avoid fabric softeners, as they may affect moisture-transfer performance.
Store dry and folded when not in use.
Inspect perforated panels periodically to ensure the textile structure remains free from debris or obstruction that may impact airflow performance.

←

BACK TO ARCHIVE

FW.004/TS_01 SS_TOP_001

FULL-MESH RUN TEE

150

SGD

FULL MESH PERFORATION ACROSS BODY AND SLEEVES. ENGINEERED FOR DAILY-RUN BREATHABILITY. RAW CUT HEM.

OVERVIEW

FW.004/TS_01 SS_TOP_001 is a short-sleeve regulation layer developed for daily movement and short-distance running. Constructed entirely from the TS_01 Glacial Mesh platform, the garment prioritizes continuous airflow and unrestricted moisture transfer through a fully perforated body structure.

Designed around the requirements of repeated daily use, SS_TOP_001 minimizes material density while maintaining sufficient coverage for urban and outdoor environments. The result is a lightweight running layer intended to reduce heat accumulation during movement without introducing unnecessary structure or weight.

As a foundational component within the FW.004 Motion System, SS_TOP_001 functions as a primary next-to-skin layer for warm conditions and high-frequency training.

TEXTILE_SYSTEM

Within SS_TOP_001, the TS_01 regulation platform is deployed across the entirety of the garment through a continuous perforation architecture spanning the body and sleeves. This approach transforms the garment into an active ventilation system rather than a conventional running tee.

By distributing airflow across the entire surface area of the garment, heat generated during movement can escape more efficiently while moisture is allowed to evaporate directly through the textile structure. The result is a regulation-first layer designed specifically for daily running conditions where breathability takes precedence over insulation or protection.

The implementation of TS_01 within SS_TOP_001 represents the most direct expression of the Glacial Mesh platform within the FW.004 ecosystem.

SYSTEM_PROPERTIES

+ FULL-SURFACE VENTILATION

Laser-cut perforation extends across all primary garment panels, promoting continuous airflow throughout the torso, shoulders and arms during movement.

+ THERMAL REGULATION

The open structure reduces heat accumulation by enabling warm air to escape through the garment rather than remaining trapped against the body.

+ LOW-MASS CONSTRUCTION

Reduced material density minimizes perceived weight during activity while maintaining the freedom of movement required for repeated daily use.

CONSTRUCTION

SS_TOP_001 utilizes a raglan sleeve configuration designed to eliminate traditional shoulder seam placement and improve mobility throughout the upper body. The sleeve geometry allows movement to occur more naturally during arm swing and sustained running efforts.

Primary body panels are constructed from TS_01 Glacial Mesh and feature laser-cut perforation distributed across the entirety of the garment. This full-panel approach ensures that ventilation remains consistent regardless of body position or movement pattern.

A raw-cut hem construction removes unnecessary finishing components at the garment edge, reducing weight while maintaining a clean and unobtrusive profile. Combined with the lightweight textile architecture, the resulting system remains focused on airflow, comfort and unrestricted movement.

PERFORMANCE

SS_TOP_001 is optimized for warm-weather training, short-distance runs and everyday movement where thermal regulation becomes the primary performance requirement. The fully perforated construction allows the garment to function as a continuous ventilation layer, supporting heat dissipation throughout activity.

During sustained effort, airflow through the garment assists in reducing moisture retention and surface saturation, helping maintain comfort across changing intensity levels. The lightweight structure also minimizes distraction during movement, allowing the garment to remain unobtrusive throughout use.

Within the FW.004 Motion System, SS_TOP_001 serves as the primary regulation layer for users seeking maximum breathability and minimal thermal burden during daily training.

CARE

Machine wash cold.
Wash with similar colors.
Do not bleach.
Do not tumble dry.
Hang dry immediately after washing.
Do not iron directly on perforated areas.
Avoid fabric softeners, as they may affect moisture-transfer performance.
Store dry and folded when not in use.
Inspect perforated panels periodically to ensure the textile structure remains free from debris or obstruction that may impact airflow performance.

←

BACK TO ARCHIVE

FW.004/TS_01 SS_TOP_001

FULL-MESH RUN TEE

150

SGD

FULL MESH PERFORATION ACROSS BODY AND SLEEVES. ENGINEERED FOR DAILY-RUN BREATHABILITY. RAW CUT HEM.

OVERVIEW

FW.004/TS_01 SS_TOP_001 is a short-sleeve regulation layer developed for daily movement and short-distance running. Constructed entirely from the TS_01 Glacial Mesh platform, the garment prioritizes continuous airflow and unrestricted moisture transfer through a fully perforated body structure.

Designed around the requirements of repeated daily use, SS_TOP_001 minimizes material density while maintaining sufficient coverage for urban and outdoor environments. The result is a lightweight running layer intended to reduce heat accumulation during movement without introducing unnecessary structure or weight.

As a foundational component within the FW.004 Motion System, SS_TOP_001 functions as a primary next-to-skin layer for warm conditions and high-frequency training.

TEXTILE_SYSTEM

Within SS_TOP_001, the TS_01 regulation platform is deployed across the entirety of the garment through a continuous perforation architecture spanning the body and sleeves. This approach transforms the garment into an active ventilation system rather than a conventional running tee.

By distributing airflow across the entire surface area of the garment, heat generated during movement can escape more efficiently while moisture is allowed to evaporate directly through the textile structure. The result is a regulation-first layer designed specifically for daily running conditions where breathability takes precedence over insulation or protection.

The implementation of TS_01 within SS_TOP_001 represents the most direct expression of the Glacial Mesh platform within the FW.004 ecosystem.

SYSTEM_PROPERTIES

+ FULL-SURFACE VENTILATION

Laser-cut perforation extends across all primary garment panels, promoting continuous airflow throughout the torso, shoulders and arms during movement.

+ THERMAL REGULATION

The open structure reduces heat accumulation by enabling warm air to escape through the garment rather than remaining trapped against the body.

+ LOW-MASS CONSTRUCTION

Reduced material density minimizes perceived weight during activity while maintaining the freedom of movement required for repeated daily use.

CONSTRUCTION

SS_TOP_001 utilizes a raglan sleeve configuration designed to eliminate traditional shoulder seam placement and improve mobility throughout the upper body. The sleeve geometry allows movement to occur more naturally during arm swing and sustained running efforts.

Primary body panels are constructed from TS_01 Glacial Mesh and feature laser-cut perforation distributed across the entirety of the garment. This full-panel approach ensures that ventilation remains consistent regardless of body position or movement pattern.

A raw-cut hem construction removes unnecessary finishing components at the garment edge, reducing weight while maintaining a clean and unobtrusive profile. Combined with the lightweight textile architecture, the resulting system remains focused on airflow, comfort and unrestricted movement.

PERFORMANCE

SS_TOP_001 is optimized for warm-weather training, short-distance runs and everyday movement where thermal regulation becomes the primary performance requirement. The fully perforated construction allows the garment to function as a continuous ventilation layer, supporting heat dissipation throughout activity.

During sustained effort, airflow through the garment assists in reducing moisture retention and surface saturation, helping maintain comfort across changing intensity levels. The lightweight structure also minimizes distraction during movement, allowing the garment to remain unobtrusive throughout use.

Within the FW.004 Motion System, SS_TOP_001 serves as the primary regulation layer for users seeking maximum breathability and minimal thermal burden during daily training.

CARE

Machine wash cold.
Wash with similar colors.
Do not bleach.
Do not tumble dry.
Hang dry immediately after washing.
Do not iron directly on perforated areas.
Avoid fabric softeners, as they may affect moisture-transfer performance.
Store dry and folded when not in use.
Inspect perforated panels periodically to ensure the textile structure remains free from debris or obstruction that may impact airflow performance.